Inventory

Used 2000 HAAS VF5/50, Table 24 X 62", X Travel 50", Y Travel 26". Z Travel 25". 30 ATC, 30 HP Spindle, 7500 RPM, 50 Taper

HAAS VF5/50, Table 24 X 62", X Travel 50", Y Travel 26". Z Travel 25". 30 ATC, 30 HP Spindle, 7500 RPM, 50 Taper

HAAS VF5/50, Table 24 X 62", X Travel 50", Y Travel 26". Z Travel 25". 30 ATC, 30 HP Spindle, 750...

Used Monarch Heavy Duty Engine Lathe, Model 32NN, Swing 41", 108" Between Centers, 40 HP,

Monarch Heavy Duty Engine Lathe, Model 32NN, 51" x 108", 32" SOC, 40 HP,

Swing Over Bed Ways: 51" | Swing Over Cross Slide: 32" | Distance Between Centers: 109" | Spindle Drive: 30 HP

Used Lodge & Shipley Heavy Duty Engine Lathe, Model 2XE-3220, 36" Swing, 288" Between Centers, 40 HP, 600 RPM, 13.5 Spindle Bore.

Lodge & Shipley Heavy Duty Engine Lathe, Model 2XE-3220, 36" x 288", 24" SOC, 40 HP, 600 RPM, 13.5 Spindle Bore.

Swing Over Bed Ways: 36" | Swing Over Cross Slide: 24" | Distance Between Centers: 288" | Spindle Drive: 40 HP

Used Lodge & Shipley Engine Lathe, Swing 32" over bed ways, 19" Swing over Cross slide, 1000 RPM, 30 HP

Lodge & Shipley Engine Lathe, 32" x 120", 19" SOC, 1000 RPM, 30 HP

Swing Over Bed Ways: 32" | Swing Over Cross Slide: 19" | Distance Between Centers: 120" | Spindle Drive: 30 HP

Used HAAS 5 Axis Vertical Machining Center, Model UMC 1000SS, X-40", Y-25", Z-25, 30 HP, 12,000rpm,, Cat 40, 30 ATC, HAAS CNC

HAAS 5 Axis Vertical Machining Center, Model UMC 1000SS, X-40", Y-25", Z-25, 30 HP, 12,000rpm, Cat 40, 30 ATC, HAAS CNC

X-Travel: 40" | Y-Travel: 25" | Z-Travel: 25" | Spindle Drive: 30 HP | Spindle Taper: Cat 40 | Spindle Spe...

Used DeVlieg Jig Mill, Model 4H-96, X Travel 96", Y Travel 72", Z Travel 24", W Travel 30", 25 HP, 21-1000 RPM

DeVlieg Jig Mill, Model 4H-96, X-96", Y-72", Z-24", W-30", 25 HP, 21-1000 RPM

Spindle Diameter: 4" | X-Travel: 96" | Y-Travel: 72" | W-Travel (Saddle): 30" | Z-Travel (Quill): 20"

Used Giddings & Lewis 5" Floor Type CNC Boring Mill, X Travel 240", Y Travel 103", 40 HP, 3000 RPM, 50 Taper, 8000B CNC

Giddings & Lewis 5" Floor Type CNC Boring Mill, X-240", Y-103", 40 HP, 3000 RPM, 50 Taper, 8000B CNC

Spindle Diameter: 5" | X-Travel (Runway): 240" | Y-Travel: 103" | Z-Travel: 36" | Spindle Drive: 40 HP

Used BETENBENDER Press Brake, 190 Ton, 144" between housings

BETENBENDER Press Brake, 190 Ton, 144" between housings

Bed Size: 8" X 120" | Distance Between Housings: 144" | Capacity: 190 Ton

Used Gockel Knife Grinder, Model GB 65 EL, Grinding Wheel 30 HP, Grinding length 100"

Gockel Knife Grinder, Model GB 65 EL, Grinding Wheel 30 HP, Grinding length 100"

1999 Gockel Knife Grinder, Model GB 65 EL, 30 HP Grinding Wheel, Grinding length 100" Grinding Wi...

Used 1999 Peddinghaus CNC Drill Line, Model BDL 1250/3, ID17678

Peddinghaus CNC Drill Line, Model BDL 1250/3

Number of Drill Spindles: 3 | Material Width: 3" - 50" | Material Height: 24" | Material Length Minimum: 62"

Used Mattison Horizontal Surface Grinder, 24" X 120" Magnetic Chuck, 30 HP Spindle

Mattison Horizontal Surface Grinder, 24" X 120" Magnetic Chuck, 30 HP Spindle

Chuck Size: (2) 24" X 60" | Cross Travel: 132" | Maximum Height under Wheel: 30" | Spindle Motor: 30 HP

Used King Vertical Boring Mill, 72" Table,

King Vertical Boring Mill, 72" Table, 87" Swing, 60" Under Rail. 40 HP 65 RPM, (2) Ram Heads

King Vertical Boring Mill, 72" Table, 87" Swing, 60" Under Rail, 40 HP 65 RPM, (2) Ram Heads Table Diameter:...